Semi-finished products, components, plastics and surface coatings

Semi-finished products & components

Bowden cables and cable pulls

For braked trailers and winches incl. cable, metal and plastic components according to individual specifications

Brake hoses

Dimensions between 290 and 370 mm according to SAE J 1401 and drawing

Stores

Taper roller bearings, needle roller bearings, bushings, slide bearings according to DIN made of high-strength material and according to individual specifications

Mounting assemblies

Welding assemblies and pre-assembled assemblies according to individual specifications (hydraulic, pneumatic,…)

Shock absorbers

Air, gas spring and bag bellows shock absorbers

Drum brake pads

According to individual specification

Stamped/bent/turned parts & welding assemblies

Turned parts

Bearing screws, sliding rollers made of steel and non-steel
automatic turned parts and longitudinally turned parts with diameter: 4 - 65 mm and length: 5 - 350 mm according to drawing

Springs

Compression, tension and torsion springs made of steel and non-steel according to drawing
Wire diameter: 2 - 10 mm

Cold-extruded parts

Axle stubs and screws, ready for installation, part weight 0.1 - 5 kg,
pressed from wire and rod material, diameter 4 - 50 mm

Stamped/bent/embossed/laser-cut parts

Sheet metal couplings and various drawing parts made of steel 2 - 8 mm thick

Thermoformed parts

Such as sealing caps, steel 1 - 2 mm thick

Connecting and safety elements

Standard parts according to DIN EN (screws, nuts, clamping sleeves) also according to drawing made of steel

Plastics

Moulded rubber parts

Round cords, O-rings, drawing parts made of SBR and other thermoplastic elastomers

Plastic parts

According to drawing up to 5 kg part weight in the centre of gravity as injection moulded part (1 component)

Technical and standard thermoplastics as granules

POM, PP, PA, PE

Technical and standard thermoplastics as semi-finished products

As plates and rolls in various dimensions and thicknesses: ABS, PS, ABS PMMA, PE, APET

Surface coatings

Surface coating

Hot-dip galvanising, electro-galvanising, cataphoretic coating, powder coating